E-Stim 2 Dual Channel Acupuncture Stimulator

The E-Stim 2 features two independently controlled channels capable of an output up to 40mA. But what you’ll really like about this device is its ability to control and treat with microcurrents. When Micro-amps is selected, the intensity dials adjust the output between 0-2mA. This level of sensitivity is important for those wishing in influence cellular health using microcurrents.

Wave length is fixed and continuous with adjustable frequency between 1-100 Hz. Green LEDs indicate when the channels is active and Hz selection. A single Yellow LED will let you know when the battery is getting low.

Pocket sized and aesthetically pleasing this would suit practitioners interested in the use of microcurrents or those who want a simple unit ready to use unit.

Specifications:

Channels	2
Intensity	0-40 mA (milliamp)
Frequency	2 -100 Hz
Waves	Continuous
Additional Functions	Micro Amp adjustability 0 – 2000  µA (2 mA)
Timer	-

500 ohm test load
Output channels
2 independent intensity channels

Frequency: 1 to 100 Hz, flashing LED
Milli-amp setting Volts & current: 0 to 40 mA, 0 to 20 volts
Micro-current setting Volts & current: 0 to 2,000 microA (2 mA), 0 to 1 volts

Pulse width: 280 microseconds
Pulse shape: asymmetric biphasic square
Pulse modes: continuous
Power indication: flashing LED, each channel
Power source: one 9 volt battery
Low power indication: yellow LED light

Dimension: 5 x 3.4" x 1"

Suitable for use with:
3.5mm Pin Type Lead STLE0001